- Sales +44 (0) 371 222 1033
- Technical +44 (0) 371 222 1055
- E info@xtratherm.com
- ×Immediate Support when you need it Callback within 1hr Monday - Friday 8am - 5pm
- Callback Support
(Phone/Video)
Full Fill Built-in Insulation System Continuous wall insulation system that delivers ultimate thermal performance with the added assurance of protection from wind driven rain.
>Find out more
The Xi products have been developed to deliver the U-value requirements to meet Passive standards. It’s no longer just about U-values: how the system builds, how it interconnects at junctions and how it is witnessed and confirmed on site, are all equally important facets.
>Find out more
Xtratherm offer an extensive range of technically enhanced rigid insulation products for commercial and industrial projects
>Find out more
Tapered Roofing System
The XtraFall system provides a high performance precision solution to thermal insulation and water drainage on at roofs.
The Xtratherm range of high performance insulation boards provides the ideal technically advanced solution for flat roof projects.
>Find out more
PLATINUM SERVICE for Developers
Developers and their design and certification team can rely on the expertise and professional support of the whole Xtratherm Team - it is not just about buying insulation products.
>Find out more
Xtratherm’s range of non-combustible, Euroclass ‘A1’ stonewool insulation provides surety when the highest fire performance is required. Stonewool Rainscreen insulation is suitable for use in ventilated facade, rainscreen and framing applications and closed systems such as curtain walling.
Full Fill Built-in Insulation System
Continuous wall insulation system that delivers ultimate thermal performance
with the added assurance of protection from wind driven rain.
PIR Insulation
Xtratherm UniSIPS is the ideal product when considering structural insulation solutions for wall, floor and roof panels. Technically advanced and thermally efficient, the load bearing panels provide a lightweight and economical solution to facilitate modern methods of construction.
Xtratherm offers a cost effective solution for builders and specifiers for the closing of cavities around window and door openings, preventing cold bridging, damp penetration, air infiltration and condensation.
Technical Support & Resources
Interactive Learning
For Better Building.
The Xi Academy is a hands-on resource to assist learning about best practice building methods, insulation and sustainability, utilising both online and face-to-face training.
Live Webinars
CPDs
Remote Support
Xi Innovation Centre
Publications
Teachers Resources
Videos
Gallery
U-Valuate
Y-Value Calculator
Superior Performance Phenolic Insulation
SR/UF
Ground Supported and Suspended Floors
Applications:Floor / Solid & Suspended
SR/UF
Safe-R Under Floor SR/UF is a superior performance rigid phenolic insulation with low emissivity aluminium facings both sides and has a thermal conductivity as low as 0.020 W/mK, delivering excellent U-values in floors.
The floor in any building is an area of considerable downward heat loss when
not properly insulated. SR/UF will significantly improve the U-value of new
and existing floors. SR/UF is lightweight, easy to install and combines high
compressive strength with low thermal conductivity, providing a high
performance solution for floor insulation.
U-Value calculations to EN ISO:6946 for UK
SR/UF Insulation for Ground Supported Slab
| PA | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 |
|---|---|---|---|---|---|
| Thickness | |||||
| 50mm | 0.23 | 0.25 | 0.25 | 0.26 | 0.27 |
| 60mm | 0.21 | 0.22 | 0.23 | 0.23 | 0.24 |
| 75mm | 0.18 | 0.19 | 0.20 | 0.20 | 0.20 |
| 80mm | 0.18 | 0.18 | 0.19 | 0.19 | 0.19 |
| 100mm | 0.15 | 0.15 | 0.15 | 0.16 | 0.16 |
U-Value calculations to EN ISO:6946 for ROI
SR/UF Insulation for Ground Supported Slab
| PA | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 |
|---|---|---|---|---|---|
| Thickness | |||||
| 50mm | 0.26 | 0.27 | 0.27 | 0.28 | 0.28 |
| 60mm | 0.23 | 0.24 | 0.24 | 0.25 | 0.25 |
| 75mm | 0.20 | 0.20 | 0.21 | 0.21 | 0.21 |
| 80mm | 0.19 | 0.19 | 0.20 | 0.20 | 0.20 |
| 100mm | 0.15 | 0.16 | 0.16 | 0.16 | 0.16 |
U-Value calculations to EN ISO:6946 for UK
SR/UF Insulation for Beam & Block Suspended Floor
| PA | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 |
|---|---|---|---|---|---|
| Thickness | |||||
| 50mm | 0.26 | 0.27 | 0.27 | 0.28 | 0.28 |
| 60mm | 0.23 | 0.24 | 0.24 | 0.25 | 0.25 |
| 75mm | 0.20 | 0.20 | 0.21 | 0.21 | 0.21 |
| 80mm | 0.19 | 0.19 | 0.20 | 0.20 | 0.20 |
| 100mm | 0.15 | 0.16 | 0.16 | 0.16 | 0.16 |
| 120mm | 0.13 | 0.14 | 0.14 | 0.14 | 0.14 |
U-Value calculations to EN ISO:6946 for ROI
SR/UF Insulation for Suspended Hollow Core Floor
| PA | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 |
|---|---|---|---|---|---|
| Thickness | |||||
| 50mm | 0.25 | 0.26 | 0.27 | 0.27 | 0.27 |
| 60mm | 0.23 | 0.23 | 0.24 | 0.24 | 0.24 |
| 75mm | 0.20 | 0.20 | 0.20 | 0.20 | 0.21 |
| 80mm | 0.19 | 0.19 | 0.19 | 0.20 | 0.20 |
| 100mm | 0.15 | 0.16 | 0.16 | 0.16 | 0.16 |
Product Downloads
Product Range
Safe-R is a superior performance phenolic insulation with a Euroclass B classification. It is faced with low emissivity foil facings on both sides and has a Lambda value as Low as 0.020 W/mK.
Stay in touch?
Follow us on Social Media
Key Points
- Reduced Insulation Thickness
- Euroclass D -s1, d0 Fire Classification
- Suitable for Underfloor Heating
- Perimeter Strips for Robust Detailing
- Lower Lambda Values for improved U-values
Xtratherm reserves the right to change this information without notice.
Xtratherm accepts no responsibility for errors or omissions on the website.
Do you have any questions?
Talk to the team who can help you with your project
Our Technical Team provides technical services throughout our customer bases in Ireland & UK. Their experience and expertise has been built through our engagement and participation with the Irish construction industry for over 30 years.
Certified Technical Knowledge.
Solutions you can trust.
Call The Technical Team:
Tel +44 (0) 371 222 1055
Tel +353 (0) 46 906 6050
